- Helps stimulate collagen production to reduce under-eye lines and wrinkles, and visible signs of fatigue.
- Helps even skin tone and texture, leaving skin firmer and plumper.
- Improves fine lines by up to 30% in four weeks. Clinical study on 20 trialists, 3 treatments per week for 4 weeks.
- Reduces wrinkle depth by 36% in four weeks. Clinical study on 28 trialists, one treatment twice a week for four weeks.
For optimal results, use 10 mins daily, 3-5 times per week. For all product information, visit the user manual.
- Remove the contents of the LightMAX MiniPro LED box.
- Peel the device side of the Hydrocolloid Patch.
- Attach it to the LightMAX MiniPro LED device.
- Once secured to the device, peel the face side of the Hydrocolloid Patch.
- Press firmly onto your under-eye area until secure.
- Hold down the power button on each device until LED lights appear.
- After 10 minutes the LED device will automatically turn off, signaling the end of your treatment.
- Remove gently from the skin.
- Remove the Hydrocolloid Patches from the LED and discard them.
- Using your ring finger, apply a small amount of Soothe & Smooth to the under-eyes.
The LightMAX MiniPro LED can be used in any target areas like nasolabial folds, forehead, or even on the body in areas that need localized repair.
For the treatment of facial wrinkles, the best results are seen by treating 3-5 times a week for 6 weeks. Maintenance treatment should be carried out as required, according to lifestyle and skin condition.
- DO NOT over-flex the LightMAX MiniPro LED device. Although it is flexible, it is not designed to withstand excess bending or folding.
- DO NOT use the LightMAX MiniPro LED without a Hydrocolloid Patch.
- Ensure LightMAX MiniPro LED is fully charged before commencing a treatment session.
- Cleanse or exfoliate the skin to remove any traces of skincare.
- Use a new Hydrocolloid Patch every treatment session.
- See the “How to use the Hydrocolloids” section for a step-to-step guide to using the Hydrocolloids.
- Peel the device side of the backing paper off an adhesive Hydrocolloid Patch.
- Place the sticky side of the adhesive Hydrocolloid Patch onto LED side (white) of the LightMAX MiniPro LED. Ensure the adhesive Hydrocolloid Patch aligns with the shape of the LightMAX MiniPro LED.
- Press down across the entire surface of the adhesive Hydrocolloid Patch.
- Peel the face side of the backing paper from the adhesive strip.
- Using a mirror, position the LightMAX MiniPro LED over the treatment area.
- Switch ON the LightMAX MiniPro LED. The device will automatically switch OFF after 10 minutes. You may stop the treatment at any time by pressing the ON/OFF button.
- After the treatment, carefully remove the LightMAX MiniPro LED and adhesive Hydrocolloid Patch from the treatment area.
- Remove the adhesive Hydrocolloid Patch from the LightMAX MiniPro LED and discard it in general household waste.
- If you would like to keep the Hydrocolloid Patch on the treatment area after the LED treatment cycle has finished, press the Hydrocolloid Patch onto the face using the tab and carefully peel the LED device from the Hydrocolloid Patch.
- Clean LightMAX MiniPro LED by following the instructions in “Cleaning the LightMAX MiniPro LED device”. Ensure that the device is NOT being charged when cleaning.
- You may treat more than one treatment area in a treatment session.
- DO NOT repeat a treatment on the same treatment area in the same session.
- The lifetime of the lithium battery can be maximized by allowing it to fully charge and then fully discharge during regular use.
- Store LightMAX MiniPro LED at room temperature in dry conditions.
- Avoid storing LightMAX MiniPro LED in dusty conditions, in direct sunlight or in damp and humid conditions.
- LightMAX MiniPro LED contains no serviceable parts.
- Before each use, with the device switched off, clean the LightMAX MiniPro LED following the cleaning instructions below. DO NOT use the LightMAX MiniPro LED device any longer if it shows any signs of damage to the material through wear and tear.
- DO NOT use the Hydrocolloid after its expiry date.
- DO NOT use the LightMAX MiniPro LED if it has been exposed to environmental conditions outside of those specified in the Technical Specification.
- Before cleaning, ensure that the charging cable is disconnected from the LightMAX MiniPro LED and that the device is not charging.
- Clean the LightMAX MiniPro LED with a water-based wipe. Stubborn stains or adhesive residue can be removed by wiping gently with 70% alcohol.
- DO NOT use water to clean LightMAX MiniPro LED.
- DO NOT use the device if you think it has come into contact with water.
Use the LIGHTMAX MINIPRO LED for 10 mins daily, 3-5 times per week. Finish by applying a small amount of Soothe & Smooth to the under-eye area.
- HYDROCOLLOID PATCHES for use with the LightMAX MiniPro LED are infused with:
- NIACINAMIDE (VITAMIN B3): A multifunctional active that improves discolouration, brightens skin tone, and softens fine lines.
- SODIUM HYALURONATE: Hydrates and plumps skin.
- BIO-ACTIVE PEPTIDE: Helps support and strengthen the skin barrier.